Titan Mechanical Services is a leading water hygiene services provider. We work as a subcontractor in the water treatment industry and with large facilities nationwide. As part of the comprehensive water hygiene services we specialise in; we offer a full suite of RPZ valve services for your facilities' water system. Our RPZ valve services include RPZ installation, RPZ maintenance and RPZ testing. RPZ testing should be carried out yearly.
You may require RPZ valve services as a part of yearly maintenance, after a Legionella risk assessment, or as part of Legionella remedial works. Below, we have put together a guide to help you understand more about installation, testing and maintenance of RPZ valves and what to expect during RPZ testing.
What are RPZ valves?
Reduced Pressure Zone valves are fitted into potable water systems as a backflow preventer of the mains water supplies. Without RPZ valves, in the occurrence of a sudden lowering of pressure in the water system, the water could flow in the opposite direction, causing contaminated water to enter the supply. If a sudden drop in water pressure occurs; RPZ valves will dump the contaminated water and prevent it from entering into the water supply.
RPZ valves are commonly used in public facilities including schools, car washes, hospitals, food processing areas, launderettes, and even commercial dishwashers.
Potable water systems are designed to hold water which is suitable for human consumption. Therefore, they must comply with the highest standards of water hygiene. It is required that RPZ valves are tested on an annual basis.
A potable water system holds water that is to be used for human consumption.
RPZ valves are an important backflow preventer. This means they prevent water flowing backwards within your water system and act as an important component in keeping your water system hygiene and Legionella compliant. RPZ valve testing and maintenance should be carried out at least every 12 months, within 30 days of the date your current certificate ends. At Titan Mechanical Services, our WRAS approved valve engineers can carry out yearly testing and also install new RPZ valves. If you are unsure of which RPZ valve service you require, you can get in touch with our friendly team for advice.
RPZ testing is usually a quick process. It takes approximately 30 minutes. However, as this depends on the number of RPZ valves and the facilities in particular, you will be given more accurate information by your engineer.
Please get in touch with our team or visit our 'Get a quote' page for more information about RPZ valve test pricing for your water hygiene compliance.
Under the Water Industry Act 1991, if you own premises with a water supply you are legally required to ensure that there is an appropriate device installed that acts as a backflow preventer of water. The installation, regular testing and servicing of RPZ valves will help to ensure Legionella contamination risks are managed effectively.
RPZ valve installation and maintenance must be completed by a qualified and WRAS approved tester. At Titan Mechanical, all our remedial work and water hygiene services are carried out by highly trained experts who meet industry standards.
RPZ testing is carried our by WRAS approved valve engineers (RPZ testers) to ensure that your RPZ valve is working as it should. We will visit your facility and determine whether your RPZ valve passes the test, needs repairing or needs replacing.
WRAS approved RPZ valves are designed in a way that they can often be repaired. We will either repair or replace your current RPZ valve. We can replace, repair or install RPZ valves of all sizes.
As your facility may have several RPZ valves, we can test your entire water system during one visit. Please get in touch with us for a quote or more information.
Yes, we operate nationwide from our base near Liverpool.
At Titan Mechanical Services we offer a range of water hygiene services for your facilities. We are experts in water treatment and legionella control and take pride in using this knowledge to provide an excellent level of service to all customers, at every opportunity. All engineers who carry out RPZ installation or maintenance must be WRAS approved. All Titan Mechanical Services engineers are WRAS approved.
Our team of experts have over 50 years of combined experience, bringing a thorough knowledge of the industry and unrivalled expertise in dealing with a variety of water systems.
We are proud to have been accredited to the highest standard for all our services. Please [visit our homepage - link] to see a full list of accreditations.
In addition to the planned remedial work and water system maintenance, we also carry out [tank refurbishment and tank reline (please link to tank reline page on all pages] services that are cost effective and completed to a very high standard.
With a Head Office based near Liverpool, we have teams working up and down the country and have the capacity to carry out Legionella remedial works in the South and South East England, North West, Midlands, South East England, and Wales, North, North East, and Scotland.
All Titan Mechanical engineers are WRAS approved to fit your RPZ valve to the highest standard.
Call 01704 335800 to speak to our expert team.